4.9
★★★★★
64 Google
Reviews
← All Articles
November 2026·5 min read

How Much Does Blown-In Insulation Cost? A Plain-Numbers Answer for Tucson Homeowners

Blown-in insulation in Tucson runs $1.25 to $2.00 per square foot installed to R-38, and where your job lands in that range depends mostly on how much insulation is already up there. Here's exactly how we price it.

Blown-in insulation: Blown-in insulation is a type of attic insulation installed by blowing loose material, typically fiberglass or cellulose, through a hose to fill an attic cavity to a specified depth. The depth determines the R-value, which measures the material's resistance to heat transfer. It is commonly used to add insulation on top of existing material or to fill irregular spaces that batt insulation cannot cover evenly.

How much does blown-in insulation cost in Tucson?

Blown-in insulation in Tucson costs $1.25 to $2.00 per square foot installed to R-38, and where your job lands in that range depends on how much insulation is already in your attic. A home with almost nothing up there needs more material to reach the target depth, so it sits closer to the higher end. A home that already has a few inches and just needs a top-off lands closer to the lower end. On a typical 1,500-square-foot single-story home, that works out to roughly $1,875 to $3,000 for the full job.

That's the honest answer, and we give it upfront because we know you're trying to budget, not just get a sales call. If you want a number specific to your home, our free attic inspection takes that guesswork away entirely.

How Much Does Blown-In Insulation Cost? A Plain-Numbers Answer for Tucson Homeowners

What makes the price go up or down?

The single biggest factor is your current insulation depth. If your attic has two or three inches of old fiberglass batts, we need to blow in significantly more material to reach our R-38 to R-49 target. More material means more bags, more time, and a higher total. If you're already at R-20 or so and just need to reach R-38, the job is lighter.

Attic size is the other obvious factor. A 2,400-square-foot home costs more to insulate than a 1,200-square-foot home, all else equal. Access also matters a little. An attic with a standard pull-down stair and reasonable clearance is straightforward. A low-pitch roof or a very tight crawl space takes longer to work through, and that can nudge the price up. We'll flag anything unusual during the inspection so you're not surprised.

If you have old or damaged insulation that needs to come out first, that's a separate line item. We handle attic insulation removal with our own removal machine, which keeps the process cleaner and faster than hauling things out by hand.

What R-value do Tucson homes actually need?

For Tucson's climate zone (Zone 2), ENERGY STAR recommends R-49 for an uninsulated attic and R-38 when adding to existing insulation, and our target for most Tucson-area homes is R-38 to R-49. R-49 makes sense for homes where the AC is working overtime or where the attic runs especially hot.

Our crew regularly measures 150 degrees or more in Tucson attics in summer, and that heat pushes straight down through your ceiling into your living space. Thin or settled insulation can't slow that transfer enough to make a real difference. Getting to R-38 or above is what actually changes how your home feels and what your AC bill looks like.

If you want to dig into the R-value question more, we've written a detailed breakdown in our guide on R-38 vs R-49 vs R-60 for Tucson homes.

What material do we use, and does it hold up in Arizona heat?

We use a fiberglass blown-in product that does not settle and holds its R-value for the life of the home. That last part matters more than most people realize. Some insulation materials compact over time, which means the R-value you started with isn't the R-value you have ten years later. The fiberglass we install doesn't have that problem.

Fiberglass is also non-organic, which means it won't absorb moisture or support mold growth the way some other materials can. In a Tucson attic that runs 150 degrees or more in summer and drops to near freezing on winter nights, a stable, moisture-resistant material is the right call. You can read more about how we approach blown-in insulation on our service page if you want the full picture.

How long does a blown-in insulation install take?

Most installs take 2 to 3 hours from setup to cleanup. That includes laying down protection in the attic access area, running the hose up through the opening, blowing the material to the right depth, and doing a final check on coverage. We work Monday through Saturday, 7 AM to 6 PM, and most Tucson metro jobs are done the same week you call.

Sierra Vista and Cochise County are served on scheduled service days; call (520) 261-3001 or book online and we will match you to the next date. The Phoenix East Valley has its own crew, and most jobs there are done the same week too. East Valley homeowners can call or text (480) 401-2540 or see the East Valley page.

Should you remove old insulation before blowing in new material?

Not always, but sometimes yes. If your existing insulation is in decent shape, just thin, we can blow right over it. Adding depth on top of old material is standard practice and works fine. The new material lies on top as its own layer, and together the two layers bring the attic up to the target R-value.

Removal makes sense when the old insulation is contaminated, whether from rodent activity, moisture damage, or mold. Leaving it in place means you're sealing the problem under new material rather than fixing it. Vermiculite is different: if we find it, we stop and refer you to a licensed asbestos contractor.

We'll give you a straight answer on this during the inspection. If removal isn't necessary, we'll tell you. If it is, we'll explain why and quote it separately so you know exactly what you're paying for.

What areas do we serve, and how do I get a quote?

We serve the greater Tucson metro including Marana, Oro Valley, Vail, Sahuarita, and surrounding communities. We also serve Sierra Vista and Cochise County, and our East Valley crew covers the Phoenix East Valley.

The easiest way to get a real number for your home is to start with our free attic inspection. We come out, measure what's there, check the current depth and condition, and give you a specific quote based on what we actually see, not a ballpark from a phone call. There's no pressure and no obligation. If your insulation is fine, we'll tell you that too.

You can book your free inspection online or call us directly at (520) 261-3001. We're available Monday through Saturday, 7 AM to 6 PM. November is actually a good time to get this done before the heat ramps up again in spring.

If you're curious how better insulation affects your actual electric bill, our post on how attic insulation changes your TEP or APS bill walks through the real numbers. And if you want to see what the attic insulation cost breakdown looks like in more detail, that page covers it as well.

Common Questions

Can I get a price without someone coming to my house?

We can give you a rough range over the phone, which is $1.25 to $2.00 per square foot installed to R-38. But an accurate quote really does require seeing the attic, because the current insulation depth is the biggest variable and we can't know that without measuring. The inspection is free, so it's worth doing before you commit to anything.

Is blown-in insulation better than batts for an existing attic?

For most existing attics, blown-in is the better choice. Batts are cut in fixed widths and leave gaps around framing, pipes, and irregular spaces. Blown-in material fills those gaps and gets into corners that batts can't reach. The result is more consistent coverage across the whole attic floor, which is what actually reduces heat transfer.

Does blown-in insulation settle over time and lose R-value?

It depends on the material. The fiberglass we install does not settle and holds its R-value for the life of the home. Cellulose, which some contractors use, can compact over time and lose some of its rated R-value. If you're comparing quotes, it's worth asking what material is being used and whether the contractor guarantees the installed R-value.

How do I know if my current insulation is enough?

The easiest way is to look at the depth. With blown fiberglass, R-38 takes about 15 inches. If you can see the tops of your ceiling joists clearly, you're almost certainly under-insulated. A free inspection from us will give you a precise measurement and a clear answer on whether you need more.

Do you also install attic fans along with insulation?

Yes. We offer a combined insulation and solar attic fan installation, and many homeowners do both at the same time. We install a 30-watt solar attic fan that runs without adding to your electric bill. You can learn more about the insulation and fan combo on our website, or just ask about it when you book your inspection.

About Arizona Attic Pros

Arizona Attic Pros is a family-owned, fully insured attic insulation, insulation removal, and 30W solar attic fan installation company (Arizona ROC #365778) run by Mike, the owner. We install CertainTeed InsulSafe blown-in fiberglass to R-38 to R-49, remove old or damaged insulation, and provide free attic inspections throughout the Tucson metro, Sierra Vista and Cochise County, and the Phoenix East Valley.

Related Articles

October 2026
How Attic Insulation Changes Your TEP or APS Electric Bill
Read →
October 2026
Is Attic Insulation Worth It in Arizona? The Payback Math Explained
Read →
April 2026
5 Ways to Reduce AC Costs This Tucson Summer
Read →